LED Position Light Set DRL for VO FH5 (2021+) - Amber

Complete set LED emitters for retrofitting your Volvo FH5 with amber DRL, or simply for replacing your emitters if one of the original breaks. These fit Volvo FH5 from 2021 and forward. There are in total 8 high-power LEDs per set with an output that is equivalent to the original.

Fits both LED and halogen headlights.

The emitters are designed for optimal durability, with powerful high-power LEDs placed on aluminum PCBs, while the original is standard PCBs. The aluminum increases the heat transfer to the heat sinks and ensures the maximum life span of the LEDs. The original connectors are used on all emitters, so connecting them is straightforward.

Notice that the emitters are not e-approved.

Each set contains four emitters and thermal paste for the mounting. There are two emitters for each side.

Mounting
Mounting is done in this way:

Tilt the cab
Remove plastic covers behind the headlights
Remove the heatsinks from the headlights
Remove the connectors from the original emitters.
Remove the emitters from the heat-sinks (with a small screwdriver or knife)
Remove and clean the thermal paste / grease, so the surface is completely clean.
Add the included thermal paste in a thin even layer, where the emitter is to be placed.
Push the new emitter completely down on the heat sink
Bend the wings on the board, marked with arrows, so that the board is fastened to the heatsinks
Connect the emitters
Mount all parts again